Top 10 Tips for Troubleshooting the Consul Fridge
*These tips can be used as a general guide for all absorption appliances.
There are a few rules that must be followed when troubleshooting the Consul fridge. If these rules are followed most problems can & will be rectified. Listed are points that must be followed before trying to troubleshoot an absorption fridge.
- Fridge is level
- Ensure pressure is 11"W.C. (Water column)
- Burner must be cleaned
- Orifice must be cleaned
- Gas supply tube from thermostat to burner must be cleaned
- Chimney and broiler tube must be cleaned of debris
- Deflector/Strangler must be cleaned of debris
- Filter in Thermostat Gas control needs to be cleaned or replaced
- Adequate ventilation around fridge
- Thermocouple connections to be snug, not over tightened
To reduce problems during summer season, (i.e. weekend use), it's best to leave the fridge running on a low setting during the week. If it's shut down on a Sunday, spiders may seek the propane odor (mercaptin), and create a restriction of the gas flow. This in turn will reduce/stop the operational efficiency of your absorption fridge/freezers.
Note: Installation and service must be by a licensed gas fitter in accordance with the local codes or with the Propane Installation Code.
Recreational Vehicles
Marine
Snowmobiles
ATV's
Utility Trailers
Hot Deals
How to Videos & Guides
Pre-Approval
Request Info
